Sunday, November 28

5 electronic repair tools for beginners

When starting an electronics and machinery repair business, you should have tools of good quality and strength on hand. These little details are often overlooked, but they turn out to be very useful in the long run.

Good quality tools are essential to the longevity of the equipment, and reliable websites like Mektronics offer good quality tools at affordable prices.

If you are embarking on the journey of electronics and machines, here are five pieces of equipment that will prove beneficial.

10W soldering iron with fine tip

If there’s one thing an electronic device can make or break, it’s the soldered joints that connect everything. It means that if the soldered connections are not of good quality, serious accidents may occur. Some soldering irons have an ESD antistatic handle that prevents EMF emissions that could damage the board.

Therefore, using a soldering iron with adjustable heat settings will increase the chances that your entire project will work properly.

PCB heat gun

Solder joints are essential, but so are the areas that connect them. This is where using a PCB heat gun will come in handy. Allows you to heat the connection that has not been soldered properly. Provides a better surface for the solder to adhere to and re-establish the connection by heating it.


A multimeter is a must for any project because it can measure anything. It can help you measure voltage, resistance, current continuity, and many more. If you are unsure about the problem with your device, this will help to find out what the problem is. Some multimeters have LCD screens that show accurate readings and other important information.

By having this tool available, you can fix any issues and continuously monitor your device.

Wire strippers and cutters

One tool that is often overlooked are wire strippers and cutters. Sometimes people make the mistake of assuming that having needle nose pliers will be enough to remove or cut cables from electronic devices. However, this is not always the case.

For example, an ATX power supply will have 20 to 24 gauge wires. You can use nose pliers for devices with less current going through them. However, if it’s something that requires more power (maybe like a PC), you may need 18 or 16 gauge wires.

The use of wire strippers and cutters is used in such situations.


While multimeters are important for testing connections and voltages, other equipment can test current flow. It is known as a tester.

Having a tester will help you determine whether or not you need to replace electronic components like diodes, resistors, and fuses. They come in a variety of colors for different purposes. The colors are labeled on the tester, so it’s easy to tell what you’re working with.

While it may seem like a lot of equipment, all you need is the basics to get started. You can keep an eye out for offers and promotions on websites like Mektronics and many more that appear in the search engine. Having the right equipment of good quality will help you do your job efficiently.

Leave a Reply

Your email address will not be published. Required fields are marked *