Friday, March 29

How to clone a hard drive / SSD on Windows or Mac


Cloning a hard disk to an SSD or between disks of this type can be something extremely interesting, since, if we buy a unit that is much faster, but we do not want to lose what we have in the previous one, we will always be able to copy exactly what is from one to another. We are going to tell you how.

It may be that we originally had a hard drive in our computer and now we have purchased an SSD to have more capacity and speed than we have had until now.

At that moment we are in the position of whether to start everything from scratch or try not to lose any of the information that we had on our old hard drive.

If the option we have chosen is to keep everything we had on the old unit that we are going to replace, we will have no choice but to clone the old disk to the new one.

The cloning process is much simpler than you might imagine at first and it doesn’t have as many headaches as you probably think.

It is clear that, if we want to keep everything we had on our old drive, especially if it is where the operating system was installed, we will have to use some type of cloning program, of the many that exist today.

This is a process that can be carried out in both Windows and Apple’s operating system for its computers.

Before cloning

Before starting the cloning process we must prepare the disk that we want to copysince if we invest a little time we can make this process not only shorter but much more effective.

The first thing we must do is delete those files that no longer serve for nothing or those that we are no longer going to need on the new album.

Also Read  What series to watch this weekend on Netflix, Disney + and Apple TV +: two attacks, black humor and a gentleman

The same we should do with those applications that we no longer use, since it is silly to send them to the new unit to not use them or delete them, so it is best that they are no longer installed in the clone.

With these two steps that we have just described, we are also going to make the process of transferring information from a disk to run faster.

we should also pass the antivirus in the most complete mode that you have to verify that we are not going to install no malware in the new unit. With this step we are going to save ourselves a good number of problems.

As a last resort and to be cautious, it would be best backup diskin case there is some kind of problem with the cloning, it is not going to be that we are left without all the information that we had accumulated.

Obviously, once we have finished the process successfully, we can delete these backups if we want.

This guide that we have prepared with features, comparisons and best options by price range will help you choose the best SSD (both internal and external) for your device.

Clone a storage drive in Windows

There are a good number of applications that allow you to clone all the information from one disk to another. the vast majority of programs work correctly, in this case what we have done is choose the software Macrium Reflect Free.

Obviously, the first thing we will have to do is go to the official website and install it on our Windows operating system. Yes, you will notice that the installation of this program is a bit heavier than in the rest of the software that you usually install on the hard drive, but nothing that can be complicated.

Also Read  There is an open war between Marvel fans for the two sides of Wanda Maximoff's character

Before we start the cloning process, the first thing we need to do is make sure that both drives are successfully connected to the computer and that the destination drives appear in the Windows File Explorer.

Once all this is verified, we must follow the following steps:

  • the first thing will be run the program that we just installed, to then see how a list with all the storage units on the computer appears on the screen.
  • We must make sure that the box next to the source drive is checked and click on the option Clone this disk, which is located just below the source disk.
  • So we’re going to have to click on Select a disk to clone.
  • At that moment you will see a list of those who are available for this action.
  • We select the one that will be the destination of our information from the list that appears by clicking on it.
  • Once we have selected it, we will click on Following to be able to continue.
  • Macrium is going to grant us the option to program the cloning, although we are going to omit it by clicking on Followingto continue the process at that time.
  • We check the details listed to be completely sure and we click To finalize.
  • The software will show us a new window with various options. We can uncheck the box next to Save as a backup definition file, if it is a unique clone and click on To accept.
  • Now it will show us a warning about the loss of all data on the destination drive (that’s why we told you before making a backup).
  • We check the box next to All destination volumes will be overwritten.
  • We confirm to continue and click Continue.
  • The process will take some time. When it is finished, we will see a window where it tells us that everything has been done successfully.
  • We will see a dialog box that everything is fine. That’s it, your drive will have been successfully cloned.
  • If we want to boot from the cloned drive, we can select it from the boot drive selection menu that every computer has when entering BIOS.
AI

Also Read  Accessories that will help you take professional photos with your mobile

This AI is capable of cloning any game in just two minutes

Clone a storage drive on Mac

In the apple computers The same task that we have seen previously can also be executed in those that have a Windows operating system.

The process is almost the same as what we have done before, but in a simpler way, since it is not a tool in which we have excessive options apart from cloning.

This software is called SuperDuper and we must download it from its official website and, of course, install it on our Mac.

Once we have done this, the steps are extremely simple, since you only have to do the following:

  • We select the source disk clicking the dropdown next to Copy and the destination disk in the dropdown next to.
  • Now we click the button copy now to start cloning.
  • At that time we will see how the progress in the application begins. It will take some time depending on the amount of information that needs to be transferred.
  • Once it has finished, it will show us on the screen that everything has finished successfully.

As you have been able to read, cloning a storage unit, be it a hard drive or an SSD, is extremely easy to do and is not complicated at all.

The good news is that we can do it both in the Windows operating system and if we have an iMac.

Leave a Reply

Your email address will not be published. Required fields are marked *