Wednesday, February 21

The best for the cold: 9 homemade heaters that you can make yourself

The cold has come again and it seems that it will stay with us for a while, if you want to warm up without spending electricity, it is best to make one of these homemade heaters.

The spring of winter has arrived and with it comes a momentary period of cold that you have to survive, but with the prices of electricity and gas skyrocketing, it is still better to opt for homemade heaters that can be made with things you walk around House.

When starting to investigate how to make homemade heaters, we have come across a series of guidelines that it is recommended that you follow. The first is always have a fire extinguisher nearby or any other element designed to put out fires.

The following recommendation is to always carefully follow the steps as this will avoid any dangerous situation that may arise. It is vitally important that everything is done according to the instructions in the videos.

alcohol heater

The first homemade heater is quite easy. The materials needed to get it going are as follows: a large can that can fit a full roll of toilet paper, a roll of toilet paper, and 96% alcohol. What you have to do is remove the cardboard tube roll from the paper, insert it into the can, soak the roll in alcohol and light it. It is recommended that the invention rest on a surface that is not wood or glass.

100W mini heater

The truth is that you have to have more preparation with this homemade heater. What is essential and necessary is a resistance cable that supports 1000 W along with 220 V in addition to offering a resistance of between 55 and 60 ohms. In addition to this you will need a small tuna can, cement mix, a voltmeter, a plug, cable and a drill to make holes in the tuna can. Now it’s time to cut two small sections of the resistance, make two holes in the can where the plug will be mounted, mix the cement and insert it into the can. The next step is to wire the two sections of the resistor to the plug and when plugged into power it will turn red generating heat.

Also Read  Hydrogen may no longer be the green fuel of the future

Complex fan heater

This heater follows the same principles as the mini heater, only it also combines the technology of a fan to distribute heat. The first thing to do is get a cylinder of plaster or clay, this can be done using the mixture for these materials and a PVC pipe. Two steel cables will be inserted from one end to the other. After this, grooves will be carved around the entire tube and it will be placed on a clay or plaster base. A resistance cable will be integrated into the grooves, which will later be connected to a plug that will go to the current. The fan effect arrives thanks to a small-format turbine that is placed in the upper part of the heater’s encapsulation.

Single fan heater

You don’t always have to use complex elements. This version only needs a cylindrical container, a small fan, a beltpack battery, resistance wire, screws and a glue gun.. The operation is similar to what has been seen, the resistance cable will be attached to the screws that, in turn, are linked to the battery, so the electricity will generate heat and this will be sent through the fan placed at the bottom of the cylindrical tube.

Soda can solar panel

This may be the greenest method of the three as a large number of cans are recycled. To carry out this you need cans, many, black spray paint, a couple of fans, PVC pipes and a wooden frame along with a methacrylate. You have to paint the cans black, glue them forming columns and then place them inside this wooden encapsulation with methacrylate. It is placed in a direction where the sun can shine directly and is integrated into the home through pipes, causing the air to move through the fans.

Also Read  The case of the 1,000 million dollar solar plant that sought to be the most advanced in the world and that today has become obsolete

Lamp pot that acts as a stove

The concept is weird. This pot is nourished by flat candles to get warm and, in addition, being made of a material that supports heat very well, it ends up being distributed evenly throughout the room in which it is located. It is advisable to make several of these pots in order to generate more heat..

alcohol stove

Alcohol may not be used as much as it should be inside these stoves, but this is the simplest and most practical example. What is necessary is a can of any type of drink. You have to cut it in half very carefully and get two uniform parts. At the base of the can, holes will be made around the entire outer contour. After this, what you have to do is get both parts of the can to fit together again, the interior is filled with alcohol and the flame will begin to come out through the holes that have been created.

Larger fan heater

Like the previous two, this fan heater uses the same materials and principles. The only difference is the scale since in this case we need to have larger elements such as a larger containerIn addition, a motor for the fan that is powerful and more length in the resistance cable. Being larger, it is recommended to use fireproof materials or materials that do not burn easily.

Decorative heating pot

Of all the heaters, this may be the most beautiful or aesthetic. What you need is a pot of clay or cement, a flammable gel that is used in some outdoor lamps, marbles and ornamental stones together with a glass. Everything is placed inside the pot, the gel or bioethanol is added if it can be obtained and the next thing is to turn it on to start enjoying the heat it gives off.. The interesting thing is that apart from emitting heat, it is capable of decorating the entire room and can be used perfectly outdoors such as gardens or terraces, both in summer and in winter.

Also Read  Hunting Bargains on mobiles, tablets and accessories: new POCO F4 GT 5G for 100 euros less only today, AirTag bargain at 29 euros and more

Leave a Reply

Your email address will not be published. Required fields are marked *