This is the best place to put the router at home

This is one of those topics that many people talk about with friends and family, since it has happened to all of us at some point to have a router that is not capable of giving the same signal power to the different rooms of our house .

This is a problem that happens very often, because the WiFi signal is affected by many things, of which it is not that we can control many inside a house.

The only thing is to follow a series of guidelines that can help us to have better coverage, that joining them all, surely something will be achieved, although there are still rooms where it will be complicated, especially if we talk about houses where there are 1 or two more floors up .

The advice that we are going to give you is not that they are the direct solution to all the problems with the low signal of the router, but they can help to compensate it a little and in several cases also to solve the problem.

Table of Contents:

What bothers the WiFi signal?

The truth is that those elements of a home that can be detrimental to the router’s WiFi signal reaching all rooms in a uniform way are many.

Starting at own house walls that can mean a very powerful barrier for the WiFi signal, going through all kinds of interference that can generate other types of devicessuch as microwaves, refrigerators and similar utensils, until reaching one of the worst enemies of coverage such as the pipes that are posted on the walls.

It is evident that against what we have just told you we cannot do anything, especially walls and pipes, that is why it is convenient to have the router located in strategic places and with certain guidelines to be able to minimize all these inconveniences.

The router close and high

Keep in mind one thing that you may not have thought of. The router does not stop using radio technology, the same one used by your favorite music station, although in the case of WiFi they are higher frequencies and with greater power, but that we can consider as similar.

We tell you this because those of you who have a radio surely know that when the signal begins to decline, if we put the device at half height it usually recovers and we hear our favorite speaker again correctly.

Well, the router should also be elevated, without us having it on the ceiling as usual, but somewhere that we can consider it to be about halfway up.

To this we must add that the signal also depends a lot on the distance, so the closer the router is, the better coverage it will offer us.

But since taking the router from one room to another is not possible, we should always choose a place (if possible) that is not only elevated, but stay in the middle between all rooms to get as uniform a signal as possible.

Placement of the antennas

Although many of you might think that if we place the antennas towards our device we will achieve a better signal, the truth is that this is not the case, since, if our router has antennas, they are more efficient if they emit as if it were a ring.

That is, it is best to place the antenna or antennas in perpendicularcreating a kind of ring when there is more than one, so that, in this way, what is the signal expands in this way.

The router never hidden or on metal objects

It may be that you do not like the router that the operator has put on you, but never put it in a closet, behind the television or somewhere that is hidden.

It’s the worst thing you can do to him, since the more hidden or surrounded by thingsthe less signal it will emit and the worse experience we will have with the signal in the different rooms of the house.

It may be very good not to see the router, but it is not practical.

The same happens, if we put the router on some magnetic placenear some electronic device or something similar, and this will not only minimize the range of the router, but it will be detrimental so that devices such as smartphones, tablets or computers have difficulties connecting with the WiFi signal emitter itself.

router frequencies

Something that we must also take into account are the frequencies of the router, that is, we all know that it is currently broadcast in two as they are 2.4GHz and 5GHz.

The 2.4 GHz signal is slower, but it reaches further than the 5 GHz, which is the opposite faster, but with less range.

Once we have the router as focused as possible and at a good heightit would be convenient to test with which of the two we have a better signal, since the 2.4 GHz could be worth it, even if the speed is somewhat lower, but with a more powerful signal.

map coverage

We could map the dwelling of the house to achieve the greatest efficiency when placing repeaters.

We could use applications to measure the power of the router signal and thus go positioning repeaters at strategic points where we see that coverage is scarce. We advise you to carry out these measurements once the router is already in its final place.

In this way it will be much easier to put the necessary repeaters to have the whole house well covered and that the signal is as homogeneous as possible.

Programs such as WiFi Analyzer can be used, which is free for Android, with which we will be able to know where the signal in our house is better and worse.

In any case, it’s not the only one, since we can also use others that generate power maps and that are much more visual about where the best and worst signal is, such as NetSpot or WisiWave, both for Windows.

What if we have two more than one floor?

After placing the WiFi correctly and knowing which are the areas with the best and worst coverage, all that remains is to make a distribution that is as accurate as possible. repeaters and if they are from mesh type (although they are more expensive) better, since they give more power.

This is something that will be practically essential if we live in a house with more than one floor. We must be sure in which area of ​​each floor we put the repeater so that we only get a good speed from the router, if not so that all the rooms on said floor can have sufficient coverage.

For this, the advice that we have told you before will be very useful, knowing that we can be witnesses of where it is the signal thanks to mapping and from what mains frequency It may be the one that suits us best.

What is certain is that on the upper floor we must put one or two repeaters to get the best signals.

If we talk about 3 floors in totalthen the most advisable thing is to put the router on the middle floor and distribute repeaters for all others.

With everything that we have told you today, you will be able to have the best signals at your disposal and in all the rooms of your house.